OMNIA

OMNIA – Insolvency

On the 6th day of June 2019, Omnia Limited (“Omnia”) was placed into liquidation on grounds of insolvency pursuant to section 146 of the Insolvency Act 2011.  Edgar Lavarello of PricewaterhouseCoopers Limited, 327 Main Street, Gibraltar, was appointed Liquidator.

The First Meeting of Creditors will take place at 11am on the 27th day of June 2019 in the office of PricewaterhouseCoopers Limited, 327 Main Street, Gibraltar.

If you believe that you may be a creditor of Omnia, please request a claim form by sending an email to joint.liquidators@gi.pwc.com and a member of the team will forward one to you for completion.

Brig (BRIG)

Brig (BRIG) – COIN INFO & MN GUIDE V2.0.0.2

COIN SPECIFICATION:

  • Name: Brig
  • Ticker: BRIG
  • Algo: Quark
  • Collateral: 6000
  • Blocktime: 60 Seconds
  • Max Supply: infinite
  • Genesis Block: 28.05.2018
  • Port: 25311
  • RPC Port: 25312

Reward:

Masternode: 70% – Staking: 30%

StartStopREWARD/BlockTotal Blocks
350,000400,00050 Coins50,000
400,000450,00040 Coins50,000
450,000500,00030 Coins50,000
500,000550,00025 Coins50,000
550,000600,00020 Coins50,000
600,000650,00015 Coins50,000
650,000700,00010 Coins50,000
700,000750,0007,5 Coins50,000
750,000800,0005 Coins50,000
800,000850,0004 Coins50,000
850,000900,0003 Coins50,000
900,000950,0002 Coins50,000
950,000end1 Coins

EXCHANGE:

COIN INFO:

MASTERNODE SETUP GUIDE Brig (BRIG) 2.0.0.2

PREREQUISITE
STEP 1 – DOWNLOAD AND SYNC THE WINDOWS WALLET

Here are the download links.

After the installation and starting the new wallet it needs some time to find network connections to other nodes. Please be patient for a moment.

Win-64bitWin-32bitLinux
STEP 2 – SETTING UP THE COLLATERAL TRANSACTION

The first step involves sending exactly the needed masternode collateral about 6000 to a new wallet address. You’ll want to have a small amount above to cover the transaction fee, so you’ll need to have a starting balance of at least, say 6001 BRIG. First, we’ll create a new wallet address to hold the collateral.

In the QT wallet, choose: File->Receiving addresse… and give it a label, such as MN01

Click Request Payment to create the address. You’ll see the new address. Choose Adddress Copy to store that address in the clipboard.

Click Close to exit the receiving address dialog. Now we’ll send the collateral amount to the address you just created.

Under the Send tab, paste the address that you copied into the Pay To: field. The Label field should pre-populate with the label you gave it earlier, in this case, MN01 and in the Amount: field, enter the actual collateral (6000 BRIG)

Click Send and your transaction will be broadcast to the network

You’ll need to wait for 15 confirmations (the current number of confirmations is viewable in the Transactions tab before the masternode will fully activate. But now wait at least 1 confirmation before you follow the guide.

We can start working through the rest of the setup in the meantime

All is clear till now? This part was successful? When yes go to the next step, when no start over. All steps are easy and clear. Read, understand and do it.

STEP 3 – LOGGING INTO YOUR VPS WITH PUTTY 

To access the VPS, we need to use a protocol called SSH. An SSH session will give you command-line access to your VPS and will be the mechanism we use for running commands on the Linux machine. We’ll use a program called PuTTY. (For OSX users, you can use your Terminal and just run the command ssh root@<YOUR VPS IP ADDRESS>)

The latest version of PuTTY can be downloaded from here. Install PuTTY and run it. Once open, you’ll see the standard PuTTy interface: Under Host Name, enter the IP address for your VPS.

You’ll likely see a security alert listing the ssh key fingerprint, choose Yes. Next up, you’ll see the login prompt for your VPS.

Note that in PuTTY, a right-click will paste the contents of your clipboard. So if you’re copying and pasting the root password, a right-click will paste. You won’t see any *’s or feedback for the password when you paste it, so just hit Enter after pasting. If you get an Access Denied message, double-check your root password and try typing it in manually rather than pasting.

STEP 4 – INSTALL THE MASTERNODE
  • cd /
  • cd usr/local/bin
  • wget https://github.com/danrachita/Brig/releases/download/v2.0.0.2/brig-cli
  • wget https://github.com/danrachita/Brig/releases/download/v2.0.0.2/brigd
  • chmod 777 brigd brig-cli
  • brigd -daemon
  • nano /root/.brig/brig.conf

Get your Masternode Priv-Key. Go in Win Wallet to Tools → Debug Consol

Type the command below and press enter

  • masternode genkey

Paste following Text with your Details to the open Config at VPS.

rpcuser=What you want
rpcpassword=What you want
rpcallowip=127.0.0.1
rpcport=25312
listen=1
server=1
daemon=1
port=25311
logintimestamps=1
maxconnections=32
masternode=1
externalip=Your VPS IP:25311
masternodeprivkey=Your Priv Key
addnode=217.61.2.36:56558
addnode=217.61.0.61:42972
addnode=89.40.127.122:55560
addnode=86.105.52.194:25311
addnode=94.177.231.198:25311
addnode=89.40.119.159:25311
addnode=89.40.118.48:54812
addnode=94.177.245.36:36856
addnode=89.40.125.9:25311
addnode=94.177.225.195:25311
addnode=217.61.109.197:60436
addnode=89.36.219.109:59538
addnode=86.105.48.150:25311
addnode=94.177.225.19:41188
addnode=86.105.50.160:53576
addnode=86.105.49.119:60656
addnode=94.177.245.36:25311
addnode=89.40.124.239:35790
addnode=3.120.153.120:33168
addnode=94.177.230.68:35444
addnode=217.61.104.243:60080
addnode=217.61.1.236:50000
addnode=207.180.227.158:54928
addnode=80.241.216.87:45348
addnode=151.248.148.145:64755
addnode=86.105.53.84:25311
addnode=5.62.41.97:20835
addnode=78.97.54.58:63284
addnode=84.117.32.177:25311
addnode=100.34.61.206:54596

  • Ctrl + o
  • Enter
  • Ctrl + x
  • brigd -daemon

Now check the Block Sync Process

  • brig-cli getinfo

When its on same Block as Explorer, then check the MN Sync Process

  • brig-cli mnsync status

When you see “RequestedMasternodeAssets” : 999, then is everything finish synced.

STEP 5 – SET MASTERNODE CONFIG (WIN WALLET)

Now hopefully your transaction to yourself has been confirmed.

Go to Tools → Debug Consol

Type the command below and press enter

  • masternode outputs

It should print something like this: {“a61877d567694a5f050cfbca8104e53e349076149af7cb6c37e013e62565377f”:“1”}

The long string is the transaction id of your payment and the number is transaction ID . You will use them shortly.

Go to the tools tab within the wallet and click open “masternode configuration file”

  • Fill in the form.
  • Type MN01
  • Then the IP of your VPS and Portnumber 253111
  • Then the PrivKey from Step 4 this is your masternode GenKey
  • The TxHash is the transaction ID/long key that you copied to the text file.
  • The Output Index is the 0 or 1 that you copied to your text file. 

Example: MN01 127.0.0.1:3883 BuDDDVRiWNCL3RF4bCQvPixRWwPpXj2W1iJaDDJtN64TvvoVS 63a2ba1c72d71507ca5fd54f183e205444bcda031e4aeb90d03ab5aa1ab10a08 1

!Everything in a line with only one space between the phrases!

Click “File Save”

STEP 5 – START MASTERNODE
  • Reopen the Winwallet
  • Click on the Masternodes tab “My masternodes”
  • Click start alias in the masternodes tab

Check the status of your masternode within the VPS by using the command below:

  • brig-cli masternode status

You should see “Masternode successfully startet”

Henga (NGH)

Henga (NGH) – COIN INFO & MN GUIDE V2.0.0.2

COIN SPECIFICATION:

  • Name: Henga
  • Ticker: NGH
  • Type: POS / MN
  • Collateral: 7000
  • Max Supply 210 Mio.
  • Block Time: 60 Seconds
  • Maturity: 121 Blocks
  • Stake min. Age: 5 Hours
  • Port: 19441
  • RPC Port: 28211

REWARD:

Block rewards: Staking – 50%, Masternode – 50%

EXCHANGE:

COIN INFO:

MASTERNODE SETUP GUIDE Henga (NGH) V2.0.0.2

PREREQUISITE
STEP 1 – DOWNLOAD AND SYNC THE WINDOWS WALLET

Here are the download links.

After the installation and starting the new wallet it needs some time to find network connections to other nodes. Please be patient for a moment.

Windos 64-bitWindows 32-bit
Linux
STEP 2 – SETTING UP THE COLLATERAL TRANSACTION

The first step involves sending exactly the needed masternode collateral about 7000 to a new wallet address. You’ll want to have a small amount above to cover the transaction fee, so you’ll need to have a starting balance of at least, say 7001 NGH. First, we’ll create a new wallet address to hold the collateral.

In the QT wallet, choose: File->Receiving addresse… and give it a label, such as MN01

Click Request Payment to create the address. You’ll see the new address. Choose Adddress Copy to store that address in the clipboard.

Click Close to exit the receiving address dialog. Now we’ll send the collateral amount to the address you just created.

Under the Send tab, paste the address that you copied into the Pay To: field. The Label field should pre-populate with the label you gave it earlier, in this case, MN01 and in the Amount: field, enter the actual collateral (7000 NGH)

Click Send and your transaction will be broadcast to the network

You’ll need to wait for 15 confirmations (the current number of confirmations is viewable in the Transactions tab before the masternode will fully activate. But now wait at least 1 confirmation before you follow the guide.

We can start working through the rest of the setup in the meantime

All is clear till now? This part was successful? When yes go to the next step, when no start over. All steps are easy and clear. Read, understand and do it.

STEP 3 – LOGGING INTO YOUR VPS WITH PUTTY 

To access the VPS, we need to use a protocol called SSH. An SSH session will give you command-line access to your VPS and will be the mechanism we use for running commands on the Linux machine. We’ll use a program called PuTTY. (For OSX users, you can use your Terminal and just run the command ssh root@<YOUR VPS IP ADDRESS>)

The latest version of PuTTY can be downloaded from here. Install PuTTY and run it. Once open, you’ll see the standard PuTTy interface: Under Host Name, enter the IP address for your VPS.

You’ll likely see a security alert listing the ssh key fingerprint, choose Yes. Next up, you’ll see the login prompt for your VPS.

Note that in PuTTY, a right-click will paste the contents of your clipboard. So if you’re copying and pasting the root password, a right-click will paste. You won’t see any *’s or feedback for the password when you paste it, so just hit Enter after pasting. If you get an Access Denied message, double-check your root password and try typing it in manually rather than pasting.

STEP 4 – INSTALL THE MASTERNODE

Download the wallet and install Script:

  • wget -q https://henga.online/tools/Henga_MN_installnew.sh
  • sudo chmod +x Henga_MN_installnew.sh
  • ./Henga_MN_installnew.sh

Get your Masternode Priv-Key. Go in Win Wallet to Tools → Debug Consol

Type the command below and press enter

  • masternode genkey

Enter your Masternode Private Key in the VPS

Now check the Block Sync Process

  • henga-cli getinfo

When its on same Block as Explorer, then check the MN Sync Process

  • henga-cli mnsync status

When you see “RequestedMasternodeAssets” : 999, then is everything finish synced.

STEP 5 – SET MASTERNODE CONFIG (WIN WALLET)

Now hopefully your transaction to yourself has been confirmed.

Go to Tools → Debug Consol

Type the command below and press enter

  • masternode outputs

It should print something like this: {“a61877d567694a5f050cfbca8104e53e349076149af7cb6c37e013e62565377f”:“1”}

The long string is the transaction id of your payment and the number is transaction ID . You will use them shortly.

Go to the tools tab within the wallet and click open “masternode configuration file”

  • Fill in the form.
  • Type MN01
  • Then the IP of your VPS and Portnumber 19441
  • Then the PrivKey from Step 4 this is your masternode GenKey
  • The TxHash is the transaction ID/long key that you copied to the text file.
  • The Output Index is the 0 or 1 that you copied to your text file. 

Example: MN01 127.0.0.1:3883 BuDDDVRiWNCL3RF4bCQvPixRWwPpXj2W1iJaDDJtN64TvvoVS 63a2ba1c72d71507ca5fd54f183e205444bcda031e4aeb90d03ab5aa1ab10a08 1

!Everything in a line with only one space between the phrases!

Click “File Save”

STEP 5 – START MASTERNODE
  • Reopen the Winwallet
  • Click on the Masternodes tab “My masternodes”
  • Click start alias in the masternodes tab

Check the status of your masternode within the VPS by using the command below:

  • henga-cli masternode status

You should see “Masternode successfully startet”


Xano (XANO)

Xano (XANO) – COIN INFO & MN GUIDE V2.0.0.0

COIN SPECIFICATION:

  • Name: Xano
  • Ticker: XANO
  • Algo: XEVAN
  • Type: POW / POS / MN
  • Block Time: 45 Seconds
  • Total Supply: 40 Mio.
  • Premine: 3.6 Mio.
  • Collateral: 10 000

Reward:

MN 50% – POS 50%

StartStopREWARD/BlockTotal Blocks
350`000400`00015 Coins50`000
400`000450`00012.5 Coins50`000
450`000500`00010 Coins50`000
500`000550`0007.5 Coins50`000
550`000600`0005 Coins50`000
600`000650`0004 Coins50`000
650`000700`0003 Coins50`000
700`000750`0002 Coins50`000
750`000800`0001 Coins50`000
800`000900`0000.75 Coins50`000
900`0001 Mio.0.5 Coins50`000
1 Mio.end0.25 Coins50`000

EXCHANGE:

COIN INFO:

MASTERNODE SETUP GUIDE Xano (XANO) V2.0.0.0

PREREQUISITE
STEP 1 – DOWNLOAD AND SYNC THE WINDOWS WALLET

Here are the download links.

After the installation and starting the new wallet it needs some time to find network connections to other nodes. Please be patient for a moment.

Win-64bitWin-32bitUbuntu 16.04
STEP 2 – SETTING UP THE COLLATERAL TRANSACTION

The first step involves sending exactly the needed masternode collateral about 10000 to a new wallet address. You’ll want to have a small amount above to cover the transaction fee, so you’ll need to have a starting balance of at least, say 10001 XANO. First we’ll create a new wallet address to hold the collateral.

In the QT wallet, choose: File->Receiving addresse… and give it a label, such as MN01

Click Request Payment to create the address. You’ll see the new address. Choose Adddress Copy to store that address in the clipboard.

Click Close to exit the receiving address dialog. Now we’ll send the collateral amount to the address you just created.

Under the Send tab, paste the address that you copied into the Pay To: field. The Label field should pre-populate with the label you gave it earlier, in this case, MN01 and in the Amount: field, enter the actual collateral (10000 XANO)

Click Send and your transaction will be broadcast to the network

You’ll need to wait for 15 confirmations (the current number of confirmations is viewable in the Transactions tab before the masternode will fully activate. But now wait at least 1 confirmation before you follow the guide.

We can start working through the rest of the setup in the meantime

All is clear till now? This part was successful? When yes go to the next step, when no start over. All steps are easy and clear. Read, understand and do it.

STEP 3 – LOGGING INTO YOUR VPS WITH PUTTY 

To access the VPS, we need to use a protocol called SSH. An SSH session will give you command-line access to your VPS and will be the mechanism we use for running commands on the Linux machine. We’ll use a program called PuTTY. (For OSX users, you can use your Terminal and just run the command ssh root@<YOUR VPS IP ADDRESS>)

The latest version of PuTTY can be downloaded from here. Install PuTTY and run it. Once open, you’ll see the standard PuTTy interface: Under Host Name, enter the IP address for your VPS.

You’ll likely see a security alert listing the ssh key fingerprint, choose Yes. Next up, you’ll see the login prompt for your VPS.

Note that in PuTTY, a right-click will paste the contents of your clipboard. So if you’re copying and pasting the root password, a right-click will paste. You won’t see any *’s or feedback for the password when you paste it, so just hit Enter after pasting. If you get an Access Denied message, double-check your root password and try typing it in manually rather than pasting.

STEP 4 – INSTALL THE MASTERNODE
  • cd && sudo apt-get -y install git && sudo git clone https://github.com/testiface/Xanomnsetup.git && cd Xanomnsetup/ && sudo bash install.sh

Get your Masternode Priv-Key. Go in Win Wallet to Tools → Debug Consol

Type the command below and press enter

  • masternode genkey

Paste your Privatekey to the VPS and press Enter.

  • Xano-cli stop
  • cd /
  • cd usr/local/bin
  • rm Xano-cli Xanod
  • wget https://github.com/danrachita/Xano-Coin/releases/download/v2.0.0.0/Xano-cli
  • wget https://github.com/danrachita/Xano-Coin/releases/download/v2.0.0.0/Xanod
  • chmod 777 Xanod Xano-cli
  • Xanod -daemon

Now check the Block Sync Process

  • Xano-cli getinfo

When its on same Block as Explorer, then check the MN Sync Process

  • Xano-cli mnsync status

When you see “RequestedMasternodeAssets” : 999, then is everything finish synced.

STEP 5 – SET MASTERNODE CONFIG (WIN WALLET)

Now hopefully your transaction to yourself has been confirmed.

Go to Tools → Debug Consol

Type the command below and press enter

  • masternode outputs

It should print something like this: {“a61877d567694a5f050cfbca8104e53e349076149af7cb6c37e013e62565377f”:“1”}

The long string is the transaction id of your payment and the number is transaction ID . You will use them shortly.

Go to the tools tab within the wallet and click open “masternode configuration file”

  • Fill in the form.
  • Type MN01
  • Then the IP of your VPS and Portnumber 8250
  • Then the PrivKey from Step 4 this is your masternode GenKey
  • The TxHash is the transaction ID/long key that you copied to the text file.
  • The Output Index is the 0 or 1 that you copied to your text file. 

Example: MN01 127.0.0.1:3883 BuDDDVRiWNCL3RF4bCQvPixRWwPpXj2W1iJaDDJtN64TvvoVS 63a2ba1c72d71507ca5fd54f183e205444bcda031e4aeb90d03ab5aa1ab10a08 1

!Everything in a line with only one space between the phrases!

Click “File Save”

STEP 5 – START MASTERNODE
  • Reopen the Winwallet
  • Click on the Masternodes tab
  • Click start alias in the masternodes tab

Check the status of your masternode within the VPS by using the command below:

  • Xano-cli masternode status

You should see “Masternode successfully startet”

Mobio (MBO)

Mobio (MBO) – COIN INFO & MN GUIDE

COIN SPECIFICATION:

  • Name: Mobio
  • Ticker: MBO
  • Collateral: 25 000
  • Type: POS / MN
  • Block Time: 90 Seconds
  • Max Supply 2.5 B
  • Maturity: 90 Minutes
  • Reward Split: MN 60% – POS 40%

EXCHANGE:

COIN INFO:

MASTERNODE SETUP GUIDE Mobio (MBO)

PREREQUISITE
STEP 1 – DOWNLOAD AND SYNC THE WINDOWS WALLET

Here are the download links.

After the installation and starting the new wallet it needs some time to find network connections to other nodes. Please be patient for a moment.

WindowsLinuxMac OSX
STEP 2 – SETTING UP THE COLLATERAL TRANSACTION

The first step involves sending exactly the needed masternode collateral about 25000 to a new wallet address. You’ll want to have a small amount above to cover the transaction fee, so you’ll need to have a starting balance of at least, say 250001 MBO. First, we’ll create a new wallet address to hold the collateral.

In the QT wallet, choose: File->Receiving addresse… and give it a label, such as MN01

Click Request Payment to create the address. You’ll see the new address. Choose Adddress Copy to store that address in the clipboard.

Click Close to exit the receiving address dialog. Now we’ll send the collateral amount to the address you just created.

Under the Send tab, paste the address that you copied into the Pay To: field. The Label field should pre-populate with the label you gave it earlier, in this case, MN01 and in the Amount: field, enter the actual collateral (25000 MBO)

Click Send and your transaction will be broadcast to the network

You’ll need to wait for 15 confirmations (the current number of confirmations is viewable in the Transactions tab before the masternode will fully activate. But now wait at least 1 confirmation before you follow the guide.

We can start working through the rest of the setup in the meantime

All is clear till now? This part was successful? When yes go to the next step, when no start over. All steps are easy and clear. Read, understand and do it.

STEP 3 – LOGGING INTO YOUR VPS WITH PUTTY 

To access the VPS, we need to use a protocol called SSH. An SSH session will give you command-line access to your VPS and will be the mechanism we use for running commands on the Linux machine. We’ll use a program called PuTTY. (For OSX users, you can use your Terminal and just run the command ssh root@<YOUR VPS IP ADDRESS>)

The latest version of PuTTY can be downloaded from here. Install PuTTY and run it. Once open, you’ll see the standard PuTTy interface: Under Host Name, enter the IP address for your VPS.

You’ll likely see a security alert listing the ssh key fingerprint, choose Yes. Next up, you’ll see the login prompt for your VPS.

Note that in PuTTY, a right-click will paste the contents of your clipboard. So if you’re copying and pasting the root password, a right-click will paste. You won’t see any *’s or feedback for the password when you paste it, so just hit Enter after pasting. If you get an Access Denied message, double-check your root password and try typing it in manually rather than pasting.

STEP 4 – INSTALL THE MASTERNODE
  • cd && sudo apt-get update -y &>/dev/null && sudo apt-get update -y &>/dev/null && sudo apt-get install p7zip-full -y &>/dev/null && sudo apt-get -y install git &>/dev/null && sudo git clone https://github.com/MobioCrypto/masternodeinstall.git &>/dev/null && cd masternodeinstall/ &>/dev/null && sudo bash install.sh && cd && rm -r masternodeinstall/

Get your Masternode Priv-Key. Go in Win Wallet to Tools → Debug Consol

Type the command below and press enter

  • masternode genkey

Enter your Masternode Private Key in the VPS.

  • Enter

Now check the Block Sync Process

  • mobio-cli getinfo

When its on same Block as Explorer, then check the MN Sync Process

  • mobio-cli mnsync status

When you see “RequestedMasternodeAssets” : 999, then is everything finish synced.

STEP 5 – SET MASTERNODE CONFIG (WIN WALLET)

Now hopefully your transaction to yourself has been confirmed.

Go to Tools → Debug Consol

Type the command below and press enter

  • masternode outputs

It should print something like this: {“a61877d567694a5f050cfbca8104e53e349076149af7cb6c37e013e62565377f”:“1”}

The long string is the transaction id of your payment and the number is transaction ID . You will use them shortly.

Go to the tools tab within the wallet and click open “masternode configuration file”

  • Fill in the form.
  • Type MN01
  • Then the IP of your VPS and Portnumber 9771
  • Then the PrivKey from Step 4 this is your masternode GenKey
  • The TxHash is the transaction ID/long key that you copied to the text file.
  • The Output Index is the 0 or 1 that you copied to your text file. 

Example: MN01 127.0.0.1:3883 BuDDDVRiWNCL3RF4bCQvPixRWwPpXj2W1iJaDDJtN64TvvoVS 63a2ba1c72d71507ca5fd54f183e205444bcda031e4aeb90d03ab5aa1ab10a08 1

!Everything in a line with only one space between the phrases!

Click “File Save”

STEP 5 – START MASTERNODE
  • Reopen the Winwallet
  • Click on the Masternodes tab “My masternodes”
  • Click start alias in the masternodes tab

Check the status of your masternode within the VPS by using the command below:

  • mobio-cli masternode status

You should see “Masternode successfully startet”

Cubex (CUB)

Cubex (CUB) – COIN INFO & MN GUIDE V 3.0.0.4

COIN SPECIFICATION:

  • Name: Cubex
  • Ticker: CUB
  • Algo: X11
  • Type: POW / POS / MN
  • Collateral: 10000
  • Block Time: 60 Seconds
  • Maturity: 50 Blocks
  • Max Supply: 21 Mio.
  • Genesis Block: 26.04.2018

Reward:

Payout: 50%MN /50% POS.

  • 20 at 400,000
  • 15 at 450,000
  • 10 at 500,000
  • 7.5 at 550,000
  • 5 at 600,000
  • 4 at 700,000
  • 3 at 800,000
  • 2 at 900,000
  • 1 at 1,000,000

EXCHANGE:

COIN INFO:

MASTERNODE SETUP GUIDE Cubex (CUB) V3.0.0.4

PREREQUISITE
STEP 1 – DOWNLOAD AND SYNC THE WINDOWS WALLET

Here are the download links.

After the installation and starting the new wallet it needs some time to find network connections to other nodes. Please be patient for a moment.

Cubex Win-64bitCubex Win-32bitLinux
STEP 2 – SETTING UP THE COLLATERAL TRANSACTION

The first step involves sending exactly the needed masternode collateral about 10000 to a new wallet address. You’ll want to have a small amount above to cover the transaction fee, so you’ll need to have a starting balance of at least, say 10001 CUB. First, we’ll create a new wallet address to hold the collateral.

In the QT wallet, choose: File->Receiving addresse… and give it a label, such as MN01

Click Request Payment to create the address. You’ll see the new address. Choose Adddress Copy to store that address in the clipboard.

Click Close to exit the receiving address dialog. Now we’ll send the collateral amount to the address you just created.

Under the Send tab, paste the address that you copied into the Pay To: field. The Label field should pre-populate with the label you gave it earlier, in this case, MN01 and in the Amount: field, enter the actual collateral (10000 CUB)

Click Send and your transaction will be broadcast to the network

You’ll need to wait for 15 confirmations (the current number of confirmations is viewable in the Transactions tab before the masternode will fully activate. But now wait at least 1 confirmation before you follow the guide.

We can start working through the rest of the setup in the meantime

All is clear till now? This part was successful? When yes go to the next step, when no start over. All steps are easy and clear. Read, understand and do it.

STEP 3 – LOGGING INTO YOUR VPS WITH PUTTY 

To access the VPS, we need to use a protocol called SSH. An SSH session will give you command-line access to your VPS and will be the mechanism we use for running commands on the Linux machine. We’ll use a program called PuTTY. (For OSX users, you can use your Terminal and just run the command ssh root@<YOUR VPS IP ADDRESS>)

The latest version of PuTTY can be downloaded from here. Install PuTTY and run it. Once open, you’ll see the standard PuTTy interface: Under Host Name, enter the IP address for your VPS.

You’ll likely see a security alert listing the ssh key fingerprint, choose Yes. Next up, you’ll see the login prompt for your VPS.

Note that in PuTTY, a right-click will paste the contents of your clipboard. So if you’re copying and pasting the root password, a right-click will paste. You won’t see any *’s or feedback for the password when you paste it, so just hit Enter after pasting. If you get an Access Denied message, double-check your root password and try typing it in manually rather than pasting.

STEP 4 – INSTALL THE MASTERNODE

Download the wallet and install Script:

  • git clone https://github.com/cubex-network/cubex-install-script.git
  • cd cubex-install-script
  • bash cub_install.sh

Get your Masternode Priv-Key. Go in Win Wallet to Tools → Debug Consol

Type the command below and press enter

  • masternode genkey

Enter your Masternode Private Key in the VPS.Enter

  • systemctl stop CUBEX.service
  • cd /
  • cd usr/local/bin
  • rm cubd cub-cli
  • wget https://github.com/danrachita/cubex/releases/download/v3.0.0.4/cub-cli
  • wget https://github.com/danrachita/cubex/releases/download/v3.0.0.4/cubd
  • chmod 777 cub-cli cubd
  • nano /root/.cub/cub.conf

Add following Nodes to your Cubex Config.

addnode=94.177.245.36
addnode=86.105.53.115
addnode=94.177.225.195
addnode=89.40.118.48
addnode=89.40.119.159
addnode=89.36.219.109
addnode=86.105.48.150
addnode=86.105.49.119
addnode=86.105.50.160
addnode=89.40.124.239
addnode=89.40.125.9
addnode=86.105.52.194
addnode=86.105.53.84
addnode=89.40.127.122
addnode=94.177.231.198
addnode=217.61.109.197
addnode=217.61.104.243
addnode=94.177.230.68
addnode=94.177.246.67
addnode=94.177.247.61
addnode=94.177.224.54
addnode=94.177.225.19
addnode=217.61.0.61
addnode=217.61.1.236
addnode=217.61.2.36
addnode=209.246.143.78
addnode=78.97.54.58
addnode=45.32.210.221
addnode=104.248.244.214

  • Ctrl + o
  • Enter
  • Ctrl + x
  • cubd -daemon

Now check the Block Sync Process

  • cub-cli getinfo

When its on same Block as Explorer, then check the MN Sync Process

  • cub-cli mnsync status

When you see “RequestedMasternodeAssets” : 999, then is everything finish synced.

STEP 5 – SET MASTERNODE CONFIG (WIN WALLET)

Now hopefully your transaction to yourself has been confirmed.

Go to Tools → Debug Consol

Type the command below and press enter

  • masternode outputs

It should print something like this: {“a61877d567694a5f050cfbca8104e53e349076149af7cb6c37e013e62565377f”:“1”}

The long string is the transaction id of your payment and the number is transaction ID . You will use them shortly.

Go to the tools tab within the wallet and click open “masternode configuration file”

  • Fill in the form.
  • Type MN01
  • Then the IP of your VPS and Portnumber 41231
  • Then the PrivKey from Step 4 this is your masternode GenKey
  • The TxHash is the transaction ID/long key that you copied to the text file.
  • The Output Index is the 0 or 1 that you copied to your text file. 

Example: MN01 127.0.0.1:3883 BuDDDVRiWNCL3RF4bCQvPixRWwPpXj2W1iJaDDJtN64TvvoVS 63a2ba1c72d71507ca5fd54f183e205444bcda031e4aeb90d03ab5aa1ab10a08 1

!Everything in a line with only one space between the phrases!

Click “File Save”

STEP 5 – START MASTERNODE
  • Reopen the Winwallet
  • Click on the Masternodes tab “My masternodes”
  • Click start alias in the masternodes tab

Check the status of your masternode within the VPS by using the command below:

  • cub-cli masternode status

You should see “Masternode successfully startet”

Cubiscoin (CBC)

Cubiscoin (CBC) – COIN INFO & MN GUIDE V1.0.1

COIN SPECIFICATION:

  • Name: Cubiscoin
  • Ticker: CBC
  • Type: MN / POS
  • Collateral: 10000
  • RPC Port: 26333
  • Port: 25333

Reward:

  • BLOCK 1 PREMINE
  • 2 TO 10K : 19 POW END (after that full POS)
  • 10K TO 40K: 199 (50%pos and 50%MN)
  • 40K TO 200K: 110 (50%pos and 50%MN)
  • 200K TO 300K: 24 (50%pos and 50%MN)
  • 300K TO 400K :22 (50%pos and 50%MN)
  • 400K TO 800K: 19 (50%pos and 50%MN)
  • 800K TO INFINITE: 12

EXCHANGE:

COIN INFO:

MASTERNODE SETUP GUIDE CubisCoin (CBC) V1.0.1

PREREQUISITE
STEP 1 – DOWNLOAD AND SYNC THE WINDOWS WALLET

Here are the download links.

After the installation and starting the new wallet it needs some time to find network connections to other nodes. Please be patient for a moment.

Win-64bitWin-32bitUbuntu 16.04
STEP 2 – SETTING UP THE COLLATERAL TRANSACTION

The first step involves sending exactly the needed masternode collateral about 10000 to a new wallet address. You’ll want to have a small amount above to cover the transaction fee, so you’ll need to have a starting balance of at least, say 10001 CBC. First, we’ll create a new wallet address to hold the collateral.

In the QT wallet, choose: File->Receiving addresse… and give it a label, such as MN01

Click Request Payment to create the address. You’ll see the new address. Choose Adddress Copy to store that address in the clipboard.

Click Close to exit the receiving address dialog. Now we’ll send the collateral amount to the address you just created.

Under the Send tab, paste the address that you copied into the Pay To: field. The Label field should pre-populate with the label you gave it earlier, in this case, MN01 and in the Amount: field, enter the actual collateral (10000 CBC)

Click Send and your transaction will be broadcast to the network

You’ll need to wait for 15 confirmations (the current number of confirmations is viewable in the Transactions tab before the masternode will fully activate. But now wait at least 1 confirmation before you follow the guide.

We can start working through the rest of the setup in the meantime

All is clear till now? This part was successful? When yes go to the next step, when no start over. All steps are easy and clear. Read, understand and do it.

STEP 3 – LOGGING INTO YOUR VPS WITH PUTTY 

To access the VPS, we need to use a protocol called SSH. An SSH session will give you command-line access to your VPS and will be the mechanism we use for running commands on the Linux machine. We’ll use a program called PuTTY. (For OSX users, you can use your Terminal and just run the command ssh root@<YOUR VPS IP ADDRESS>)

The latest version of PuTTY can be downloaded from here. Install PuTTY and run it. Once open, you’ll see the standard PuTTy interface: Under Host Name, enter the IP address for your VPS.

You’ll likely see a security alert listing the ssh key fingerprint, choose Yes. Next up, you’ll see the login prompt for your VPS.

Note that in PuTTY, a right-click will paste the contents of your clipboard. So if you’re copying and pasting the root password, a right-click will paste. You won’t see any *’s or feedback for the password when you paste it, so just hit Enter after pasting. If you get an Access Denied message, double-check your root password and try typing it in manually rather than pasting.

STEP 4 – INSTALL THE MASTERNODE

Download the wallet and install Script:

Get your Masternode Priv-Key. Go in Win Wallet to Tools → Debug Consol

Type the command below and press enter

  • masternode genkey

Back to your VPS and add following Text with your Settings.

rpcuser=What you want
rpcpassword=What you want
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
port=25333
logintimestamps=1
maxconnections=32
masternode=1
externalip=Your Vps IP:25333
masternodeprivkey=Your Priv Key
addnode=149.28.90.181
addnode=66.42.64.91
addnode=173.199.124.50
addnode=95.31.8.89
addnode=212.237.59.75

  • Ctrl+o
  • Enter
  • Ctrl+x
  • cubisd -daemon

Now check the Block Sync Process

  • cubis-cli getinfo

When its on same Block as Explorer, then check the MN Sync Process

  • cubis-cli mnsync status

When you see “RequestedMasternodeAssets” : 999, then is everything finish synced.

STEP 5 – SET MASTERNODE CONFIG (WIN WALLET)

Now hopefully your transaction to yourself has been confirmed.

Go to Tools → Debug Consol

Type the command below and press enter

  • masternode outputs

It should print something like this: {“a61877d567694a5f050cfbca8104e53e349076149af7cb6c37e013e62565377f”:“1”}

The long string is the transaction id of your payment and the number is transaction ID . You will use them shortly.

Go to the tools tab within the wallet and click open “masternode configuration file”

  • Fill in the form.
  • Type MN01
  • Then the IP of your VPS and Portnumber 25333
  • Then the PrivKey from Step 4 this is your masternode GenKey
  • The TxHash is the transaction ID/long key that you copied to the text file.
  • The Output Index is the 0 or 1 that you copied to your text file. 

Example: MN01 127.0.0.1:9733 BuDDDVRiWNCL3RF4bCQvPixRWwPpXj2W1iJaDDJtN64TvvoVS 63a2ba1c72d71507ca5fd54f183e205444bcda031e4aeb90d03ab5aa1ab10a08 1

!Everything in a line with only one space between the phrases!

Click “File Save”

STEP 5 – START MASTERNODE
  • Reopen the Winwallet
  • Click on the Masternodes tab
  • Click start alias in the masternodes tab

Check the status of your masternode within the VPS by using the command below:

  • cubis-cli masternode status

You should see “Masternode successfully startet”


Delor (DLR)

Delor (DLR) – COIN INFO & MN GUIDE V2.0.0.0

COIN SPECIFICATION:

  • Name: Delor
  • Ticker: DLR
  • Collateral: 6000
  • Algo: Quark
  • Type: POW / MN / POS
  • Min Staking age: 2 Hours
  • Block Time: 60 Seconds
  • Supply: infinite
  • Premined: 240`000
  • Genesis Block: 25.05.2018
  • RPC Port: 9734
  • Port: 9733

REWARD:

Block rewards: Staking 25 – %, Masternode – 75%

  • 50 at 400,000
  • 40 at 450,000
  • 30 at 500,000
  • 25 at 550,000
  • 20 at 600,000
  • 15 at 650,000
  • 10 at 700,000
  • 7.5 at 750,000
  • 5 at 800,000
  • 4 at 850,000
  • 3 at 900,000
  • 2 at 950,000

EXCHANGE:

COIN INFO:

MASTERNODE SETUP GUIDE Delor (DLR) V2.0.0.0

PREREQUISITE
STEP 1 – DOWNLOAD AND SYNC THE WINDOWS WALLET

Here are the download links.

After the installation and starting the new wallet it needs some time to find network connections to other nodes. Please be patient for a moment.

Win-x64ubuntu 18.04ubuntu 16.04
STEP 2 – SETTING UP THE COLLATERAL TRANSACTION

The first step involves sending exactly the needed masternode collateral about 6000 to a new wallet address. You’ll want to have a small amount above to cover the transaction fee, so you’ll need to have a starting balance of at least, say 6001 DLR. First we’ll create a new wallet address to hold the collateral.

In the QT wallet, choose: File->Receiving addresse… and give it a label, such as MN01

Click Request Payment to create the address. You’ll see the new address. Choose Adddress Copy to store that address in the clipboard.

Click Close to exit the receiving address dialog. Now we’ll send the collateral amount to the address you just created.

Under the Send tab, paste the address that you copied into the Pay To: field. The Label field should pre-populate with the label you gave it earlier, in this case, MN01 and in the Amount: field, enter the actual collateral (6000 DLR)

Click Send and your transaction will be broadcast to the network

You’ll need to wait for 15 confirmations (the current number of confirmations is viewable in the Transactions tab before the masternode will fully activate. But now wait at least 1 confirmation before you follow the guide.

We can start working through the rest of the setup in the meantime

All is clear till now? This part was successful? When yes go to the next step, when no start over. All steps are easy and clear. Read, understand and do it.

STEP 3 – LOGGING INTO YOUR VPS WITH PUTTY 

To access the VPS, we need to use a protocol called SSH. An SSH session will give you command-line access to your VPS and will be the mechanism we use for running commands on the Linux machine. We’ll use a program called PuTTY. (For OSX users, you can use your Terminal and just run the command ssh root@<YOUR VPS IP ADDRESS>)

The latest version of PuTTY can be downloaded from here. Install PuTTY and run it. Once open, you’ll see the standard PuTTy interface: Under Host Name, enter the IP address for your VPS.

You’ll likely see a security alert listing the ssh key fingerprint, choose Yes. Next up, you’ll see the login prompt for your VPS.

Note that in PuTTY, a right-click will paste the contents of your clipboard. So if you’re copying and pasting the root password, a right-click will paste. You won’t see any *’s or feedback for the password when you paste it, so just hit Enter after pasting. If you get an Access Denied message, double-check your root password and try typing it in manually rather than pasting.

STEP 4 – INSTALL THE MASTERNODE
  • cd ..
  • cd usr/local/bin
  • wget https://github.com/danrachita/delor/releases/download/v2.0.0.0/delor-cli
  • wget https://github.com/danrachita/delor/releases/download/v2.0.0.0/delord
  • chmod 777 delord delor-cli
  • delord -daemon
  • cd /
  • sudo nano root/.delor/delor.conf

Get your Masternode Priv-Key. Go in Win Wallet to Tools → Debug Consol

Type the command below and press enter

  • masternode genkey

Back to your VPS and add following Text with your Settings.

rpcuser=What you want
rpcpassword=What you want
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
port=9733
logintimestamps=1
maxconnections=32
#bind=Your VPS IP
masternode=1
externalip=Your VPS IP:9733
masternodeprivkey=Your Priv Key
addnode=78.97.54.58:9733
addnode=89.137.16.171:9733

  • Ctrl+o
  • Enter
  • Ctrl+x
  • delord -daemon

Now check the Block Sync Process

  • delor-cli getinfo

When its on same Block as Explorer, then check the MN Sync Process

  • delor-cli mnsync status

When you see “RequestedMasternodeAssets” : 999, then is everything finish synced.

STEP 5 – SET MASTERNODE CONFIG (WIN WALLET)

Now hopefully your transaction to yourself has been confirmed.

Go to Tools → Debug Consol

Type the command below and press enter

  • masternode outputs

It should print something like this: {“a61877d567694a5f050cfbca8104e53e349076149af7cb6c37e013e62565377f”:“1”}

The long string is the transaction id of your payment and the number is transaction ID . You will use them shortly.

Go to the tools tab within the wallet and click open “masternode configuration file”

  • Fill in the form.
  • Type MN01
  • Then the IP of your VPS and Portnumber 9733
  • Then the PrivKey from Step 4 this is your masternode GenKey
  • The TxHash is the transaction ID/long key that you copied to the text file.
  • The Output Index is the 0 or 1 that you copied to your text file. 

Example: MN01 127.0.0.1:9733 BuDDDVRiWNCL3RF4bCQvPixRWwPpXj2W1iJaDDJtN64TvvoVS 63a2ba1c72d71507ca5fd54f183e205444bcda031e4aeb90d03ab5aa1ab10a08 1

!Everything in a line with only one space between the phrases!

Click “File Save”

STEP 5 – START MASTERNODE
  • Reopen the Winwallet
  • Click on the Masternodes tab
  • Click start alias in the masternodes tab

Check the status of your masternode within the VPS by using the command below:

  • delor-cli masternode status

You should see “Masternode successfully startet”

Worx (WORX)

Worx (WORX) – COIN INFO & MN GUIDE V1.5.1.1

COIN SPECIFICATION:

  • Name: Worx
  • Ticker: WORX
  • POW Algo: Quark
  • Type: POW / POS / MN
  • POW Blocks: 1 – 1430
  • Premine: 100`000 WORX
  • Block Time: 60 Seconds
  • Collateral: 5000
  • Maturity: 101 Confirmations
  • RPC Port: 31313
  • Port: 3300

Rewards:

PhaseBlock HeightRewardMasternodesPoS Stakers
Phase 11431-14402 WORX80%20%
Phase 21441-288004 WORX80%20%
Phase 328801-576008 WORX80%20%
Phase 457601-8640012 WORX80%20%
Phase 586401-11520016 WORX80%20%
Phase 6115201-14400020 WORX80%20%
Phase 7144001-17280024 WORX80%20%
Phase 8172801-20160010 WORX80%20%
Phase 9a201601-4400008 WORX80%20%
Phase 9b440001-4608008 WORX70%30%
Phase 10460801-9864006 WORX70%30%
Phase 11986401-end3 WORX70%30%

EXCHANGE:

COIN INFO:

COIN LISTINGS:

MASTERNODE SETUP GUIDE Worx (WORX) V1.5.1.1

PREREQUISITE
STEP 1 – DOWNLOAD AND SYNC THE WINDOWS WALLET

Here are the download links.

After the installation and starting the new wallet it needs some time to find network connections to other nodes. Please be patient for a moment.

Win-64bitWin-32bitUbuntu 16.04
STEP 2 – SETTING UP THE COLLATERAL TRANSACTION

The first step involves sending exactly the needed masternode collateral about 5000 to a new wallet address. You’ll want to have a small amount above to cover the transaction fee, so you’ll need to have a starting balance of at least, say 5001 WORX. First, we’ll create a new wallet address to hold the collateral.

In the QT wallet, choose: File->Receiving addresse… and give it a label, such as MN01

current number of confirmations is viewable in the Transactions tab before the masternode will fully activate. But now wait at least 1 confirmation before you follow the guide.

We can start working through the rest of the setup in the meantime

All is clear till now? This part was successful? When yes go to the next step, when no start over. All steps are easy and clear. Read, understand and do it.

STEP 3 – LOGGING INTO YOUR VPS WITH PUTTY 

To access the VPS, we need to use a protocol called SSH. An SSH session will give you command-line access to your VPS and will be the mechanism we use for running commands on the Linux machine. We’ll use a program called PuTTY. (For OSX users, you can use your Terminal and just run the command ssh root@<YOUR VPS IP ADDRESS>)

The latest version of PuTTY can be downloaded from here. Install PuTTY and run it. Once open, you’ll see the standard PuTTy interface: Under Host Name, enter the IP address for your VPS.

You’ll likely see a security alert listing the ssh key fingerprint, choose Yes. Next up, you’ll see the login prompt for your VPS.

Note that in PuTTY, a right-click will paste the contents of your clipboard. So if you’re copying and pasting the root password, a right-click will paste. You won’t see any *’s or feedback for the password when you paste it, so just hit Enter after pasting. If you get an Access Denied message, double-check your root password and try typing it in manually rather than pasting.

STEP 4 – INSTALL THE MASTERNODE

Download the wallet and install Script:

  • bash <(curl https://raw.githubusercontent.com/worxcoin/WorxInstaller/master/worx_installer_U16)
  • 1D
  • Enter

Get your Masternode Priv-Key. Go in Win Wallet to Tools → Debug Consol

Type the command below and press enter

  • masternode genkey

Enter your Masternode Private Key in the VPS and press Enter.

Now check the Block Sync Process

  • worx-cli getinfo

When its on same Block as Explorer, then check the MN Sync Process

  • worx-cli mnsync status

When you see “RequestedMasternodeAssets” : 999, then is everything finish synced.

STEP 5 – SET MASTERNODE CONFIG (WIN WALLET)

Now hopefully your transaction to yourself has been confirmed.

Go to Tools → Debug Consol

Type the command below and press enter

  • masternode outputs

It should print something like this: {“a61877d567694a5f050cfbca8104e53e349076149af7cb6c37e013e62565377f”:“1”}

The long string is the transaction id of your payment and the number is transaction ID . You will use them shortly.

Go to the tools tab within the wallet and click open “masternode configuration file”

  • Fill in the form.
  • Type MN01
  • Then the IP of your VPS and Portnumber 3300
  • Then the PrivKey from Step 4 this is your masternode GenKey
  • The TxHash is the transaction ID/long key that you copied to the text file.
  • The Output Index is the 0 or 1 that you copied to your text file. 

Example: MN01 127.0.0.1:3883 BuDDDVRiWNCL3RF4bCQvPixRWwPpXj2W1iJaDDJtN64TvvoVS 63a2ba1c72d71507ca5fd54f183e205444bcda031e4aeb90d03ab5aa1ab10a08 1

!Everything in a line with only one space between the phrases!

Click “File Save”

STEP 5 – START MASTERNODE
  • Reopen the Winwallet
  • Click on the Masternodes tab “My masternodes”
  • Click start alias in the masternodes tab

Check the status of your masternode within the VPS by using the command below:

  • worx-cli masternode status

You should see “Masternode successfully startet”

Xando (XDO)

Xando (XDO) – COIN INFO & MN GUIDE V1.0.0.1

COIN SPECIFICATION:

  • Name: Xando
  • Ticker: XDO
  • Type: MN / POS
  • Block Time: 60 Seconds
  • Collateral: 6000
  • Max Supply: 380 Mio.
  • Premine: 150`000
  • Minimum Staking Age: 1 Hour
  • Reward Split: 50% MN / 50% POS
  • Port: 28599
  • RPC-Port: 17599
StartStopREWARD/BlockTotal Blocks
350`000400`00050 Coins50`000
400`000450`00040 Coins50`000
450`000500`00030 Coins50`000
500`000550`00025 Coins50`000
550`000600`00020 Coins50`000
600`000650`00015 Coins50`000
650`000700`00010 Coins50`000
700`000750`0007,5 Coins50`000
750`000800`0005 Coins50`000
800`000850`0004 Coins50`000
850`000900`0003 Coins50`000
900`000950`0002 Coins50`000
950`0001 Mio.1 Coins50`000
1 Mio.end5 Coins

EXCHANGE:

COIN INFO:

MASTERNODE SETUP GUIDE XANDO (XDO)

PREREQUISITE
STEP 1 – DOWNLOAD AND SYNC THE WINDOWS WALLET

Here are the download links.

After the installation and starting the new wallet it needs some time to find network connections to other nodes. Please be patient for a moment.

Windows-qt.exeXando-cliXandod
STEP 2 – SETTING UP THE COLLATERAL TRANSACTION

The first step involves sending exactly the needed masternode collateral about 6000 to a new wallet address. You’ll want to have a small amount above to cover the transaction fee, so you’ll need to have a starting balance of at least, say 6001 XDO. First we’ll create a new wallet address to hold the collateral.

In the QT wallet, choose: File->Receiving addresse… and give it a label, such as MN01

Click Request Payment to create the address. You’ll see the new address. Choose Adddress Copy to store that address in the clipboard.

Click Close to exit the receiving address dialog. Now we’ll send the collateral amount to the address you just created.

Under the Send tab, paste the address that you copied into the Pay To: field. The Label field should pre-populate with the label you gave it earlier, in this case, MN01 and in the Amount: field, enter the actual collateral (6000 XDO)

Click Send and your transaction will be broadcast to the network

You’ll need to wait for 15 confirmations (the current number of confirmations is viewable in the Transactions tab before the masternode will fully activate. But now wait at least 1 confirmation before you follow the guide.

We can start working through the rest of the setup in the meantime

All is clear till now? This part was successful? When yes go to the next step, when no start over. All steps are easy and clear. Read, understand and do it.

STEP 3 – LOGGING INTO YOUR VPS WITH PUTTY 

To access the VPS, we need to use a protocol called SSH. An SSH session will give you command-line access to your VPS and will be the mechanism we use for running commands on the Linux machine. We’ll use a program called PuTTY. (For OSX users, you can use your Terminal and just run the command ssh root@<YOUR VPS IP ADDRESS>)

The latest version of PuTTY can be downloaded from here. Install PuTTY and run it. Once open, you’ll see the standard PuTTy interface: Under Host Name, enter the IP address for your VPS.

You’ll likely see a security alert listing the ssh key fingerprint, choose Yes. Next up, you’ll see the login prompt for your VPS.

Note that in PuTTY, a right-click will paste the contents of your clipboard. So if you’re copying and pasting the root password, a right-click will paste. You won’t see any *’s or feedback for the password when you paste it, so just hit Enter after pasting. If you get an Access Denied message, double-check your root password and try typing it in manually rather than pasting.

STEP 4 – INSTALL THE MASTERNODE
  • cd ..
  • cd usr/local/bin
  • wget https://github.com/danrachita/xando/releases/download/1.0.0.1/xando-cli
  • wget https://github.com/danrachita/xando/releases/download/1.0.0.1/xandod
  • chmod 777 xandod xando-cli
  • xandod -daemon
  • Enter
  • cd ~
  • cd ..
  • sudo nano root/.xando/xando.conf

Get your Masternode Priv-Key. Go in Win Wallet to Tools → Debug Consol

Type the command below and press enter

  • masternode genkey

Back to your VPS and add following Text with your Settings.

rpcuser=What you want
rpcpassword=What you want
rpcallowip=127.0.0.1
rpcport=17599
listen=1
server=1
daemon=1
port=28599
logintimestamps=1
maxconnections=32
bind=Your VPS IP
masternode=1
externalip=Your VPS IP:28599
masternodeprivkey=Your Priv Key
addnode=78.97.54.58
addnode=84.117.32.177
addnode=45.76.122.143
addnode=45.32.18.42
addnode=94.177.215.114
addnode=80.211.29.5
addnode=108.61.170.133
addnode=80.240.20.173
addnode=173.249.43.182
addnode=212.237.1.224
addnode=51.15.117.71
addnode=149.28.93.190
addnode=45.77.54.190
addnode=217.69.5.95
addnode=85.121.197.62
addnode=35.240.8.188
addnode=82.165.71.117
addnode=31.148.220.148

  • Ctrl+o
  • Enter
  • Ctrl+x
  • xandod -daemon

Now check the Block Sync Process

  • xando-cli getinfo

When its on same Block as Explorer, then check the MN Sync Process

  • xando-cli mnsync status

When you see “RequestedMasternodeAssets” : 999, then is everything finish synced.

STEP 5 – SET MASTERNODE CONFIG (WIN WALLET)

Now hopefully your transaction to yourself has been confirmed.

Go to Tools → Debug Consol

Type the command below and press enter

  • masternode outputs

It should print something like this: {“a61877d567694a5f050cfbca8104e53e349076149af7cb6c37e013e62565377f”:“1”}

The long string is the transaction id of your payment and the number is transaction ID . You will use them shortly.

Go to the tools tab within the wallet and click open “masternode configuration file”

  • Fill in the form.
  • Type MN01
  • Then the IP of your VPS and Portnumber 28599
  • Then the PrivKey from Step 4 this is your masternode GenKey
  • The TxHash is the transaction ID/long key that you copied to the text file.
  • The Output Index is the 0 or 1 that you copied to your text file. 

Example: MN01 127.0.0.1:3883 BuDDDVRiWNCL3RF4bCQvPixRWwPpXj2W1iJaDDJtN64TvvoVS 63a2ba1c72d71507ca5fd54f183e205444bcda031e4aeb90d03ab5aa1ab10a08 1

!Everything in a line with only one space between the phrases!

Click “File Save”

STEP 5 – START MASTERNODE
  • Reopen the Winwallet
  • Click on the Masternodes tab
  • Click start alias in the masternodes tab

Check the status of your masternode within the VPS by using the command below:

  • xando-cli masternode status

You should see “Masternode successfully startet”